Product descriptio
1: FRP/SMC/GRP/BMC water tank, water storage tank
1, SMC/FRP combined water tank is designed in cooperation with the Fiberglass Research Institute of the National Building Materials Bureau, which is a new type of water tank widely used in the world. It has the advantages of no leakage, light weight, good water quality, beautiful outline, long service life, good advantages and easy installation.
2). The sealing of the water storage tank adopts a specially developed sealing belt. The sealing tape is non-toxic, waterproof, elastic, small permanent deformation, and has a service life of more than 30 years.
3, SMC combined water tank is made of SMC molded veneer, packaging materials, metal fasteners and tubing system combination. Can be assembled according to user needs 1-500 tons water tank. If the original water tank needs to be replaced, there is no need to rebuild the house, the imported moulded veneer is reassembled by the gate, the availability is very strong, and the execution of the works department brings great convenience to the design. The company has successfully developed SMC reinforced combination water tanks externally and has recently been approved for use by customers.
2: Galvanized steel water tank, water storage tank
1) The plate is pressed by special equipment, the surface is smooth, and the concave shape of the plate is conducive to reducing the pressure of water on the plate.
2) This plate is made of Q235 steel.
3) Thickness: 3mm, 2.5mm, 2mm, 1.5mm, depending on the size of the tank.
4) Size of hot-dip galvanized steel plate: 1000mm * 1000mm, 1000mm * 500mm, 500mm * 500mm.
5) The size of the water tank can be designed according to the size of the location, with a maximum height of 5 meters.
3: Stainless steel water tank/storage tank/assembled water tank, storage tank
1, the selection of imported food grade SUS stainless steel plate, completely block sunlight, no algae reproduction, always keep the water clean
2, the company's unique plate, difficult compaction molding process, with the minimum material consumption to achieve high strength operation requirements, the weight is only 1/3 of the ordinary steel water tank, although the selection of high-quality stainless steel plate, but the price is almost close to the ordinary carbon steel water tank.
3, the model according to user requirements, the volume can meet all design requirements, erection room without special requirements, can provide insulation services.
Precautions for the installation and use of stainless steel water tank/storage tank/assembly water tank:
1. Stainless steel water tank/storage tank/assembly tank /FRP, SMC water tank design, please do not store hot water and other liquids (chemicals, oil, etc.) before storing normal temperature tap water
2. During construction, please install and stay according to the basic size requirements, provide construction power supply and check the water used by the seal.
3. Avoid using fire sources near the water tank. When welding work, must take protective measures, do not make the flake splash on the tank plate
4. Contaminants or water in the tank must be prevented from flowing in from the outside. Easy to inspect and to be safe from maintenance, there must be some space around the tank
5. Maintenance of stainless steel water tank/storage tank/assembly tank.
Use soft equipment to clean the inside and outside of the tank. If you have not used water for a long time, please drain the water before use, and use the inside of the tank again after a good check. The water tank for new clothes must be cleaned twice before use.
Product performance (stainless steel tank/storage tank/assembly tank/SMC tank) :
SMC moulded veneer is the selection of non-toxic resin, after the molding process after solidification. The box is soaked in water, the water quality should be stable, without toxicity, in line with the national tap water standard GB5749-85).
The tank is sealed with a specially unfolded sealing tape. The sealing tape is non-toxic, waterproof, elastic, small permanent deformation, and has a service life of more than 30 years.
SMC molded veneer mechanized molding performance meets the following requirements:
Tensile strength >59 MPa
Palestine hardness >30
Bending strength >78 MPa
Water absorption <1.0%
Bending modulus elasticity 5900 MPa
3. Installation of stainless steel water tank/storage tank/assembly tank.
1) Make the base of the water tank: concrete base or steel support tower.
Make sure that the base is in the same horizontal plane and that the joints of the base plate are loaded on the support base.
2) According to the direction of the water tank, weld the connection, or connect through bolts and nuts.
3) After assembly, put it into water to detect leakage. After 12 hours of filling, if there is no leakage, the tank can be used normally.
4. Advantages:
1) It is durable;
2) Prevent secondary pollution of water quality, which is conducive to human health.
3) The water tank meets the standardization requirements of building products
5. Used for:
This hot dip galvanizing tank is suitable for:
1) Building water storage, 2) regulating water tanks, 3) inflatable water tanks for heating systems, 4) condensing water tanks and building construction, 5) geological exploration, 6) industry,
7) Defense works, fire protection, fire prevention and water storage. 8) and
Other temporary storage tanks.
6. Spare parts for stainless steel water tank/storage tank/assembly tank/SMC, FRP water tank/galvanized steel water tank:
The location of the inlet, outlet, overflow and water tank depends on the design.
The channel around the tank should not be less than 700mm, and the bottom and cover should not be less than 600mm. After installation, all the surroundings between the bottom and bottom standard plate connections must be located on the bracket.
Our extensive range includes top-tier SMC FRP Water Tanks, FRP Integral Water Tanks, FRP Assembled Water Tanks, FRP Domestic Water Tanks, FRP Fire Water Tanks, and FRP Insulated Water Tanks, among others. Each model is crafted with precision to ensure optimal performance and durability.
FRP water tanks come in two exceptional varieties: Assembled FRP Water Tanks and SMC Water Tanks. These SMC Water Tanks are celebrated for their lightweight design, ensuring rust-free and leak-proof performance. They promise superior water quality, extensive usability, an impressive lifespan, excellent insulation, and an eye-catching appearance. Installation and maintenance are a breeze, making them a practical and efficient choice for any setting.
Our tanks are characterized by effortless installation and straightforward cleanability, requiring minimal maintenance while offering robust adaptability. Perfectly suited for industrial and mining sectors, enterprises, institutions, residential areas, hotels, restaurants, and more, they are ideal for drinking water storage, greywater treatment, fire water requirements, and beyond.
Main Parameters
With a focus on excellence, our tanks boast: Tensile Strength: ≥ 60 MPa; Bending Strength: ≥ 100 MPa; Bending Elastic Modulus: ≥ 7.0 GPa; Barcol Hardness: ≥ 60; Glass Fiber Content: ≥ 25%; Water Absorption: ≤ 1.0; and absolute leak-proof integrity under a pressure of ≤ 0.06 MPa.
Glass Fiber Reinforced Plastic Water Tank: Installation Structure and Fittings
Packing: Securely packaged in non-fumigation wooden cases, our products are perfectly suited for safe and efficient sea transportation.
Audited Supplier 
){kind=link}